Spring latches are used when the locking bolt must not protrude temporarily. The locking bolt is retracted by turning the toggle through 180°. A locking notch ensures that the toggle is held in this position. Sleeve protrusion (5 mm in the drawing) according to customer requirements. Toggle perpendicular to the plate.
Available Versions
Select from the versions listed below. The currently selected one is highlighted in color.
| Drawing | Product no. | Material | Surface | Bolt diameter | Hub | Plate |
|---|---|---|---|---|---|---|
| 2142.1628 | Steel | blue galvanised | 10 | 10 | 90 x 30 | |
| 2142.2170 | Stainless steel | blank | 10 | 14 | 90 x 30 | |
| 2142.3042 | Steel | blue galvanised | 8 | 14 | 90 x 30 | |
| 2142.3155 | Steel | blue galvanised | 10 | 14 | 90 x 30 | |
| 2142.3156 | Steel | blue galvanised | 12 | 14 | 90 x 30 | |
| 2142.3157 | Stainless steel | blank | 8 | 14 | 90 x 30 | |
| 2142.3158 | Stainless steel | blank | 10 | 10 | 90 x 30 | |
| 2142.3160 | Stainless steel | blank | 12 | 14 | 90 x 30 | |
| 2142.3161 | Stainless steel | blank | 15 | 14 | 90 x 30 | |
| 2142.3163 | Steel | blue galvanised | 15 | 14 | 90 x 30 | |
| 2142.3164 | Steel | blank | 12 | 14 | 90 x 30 | |
| 2142.3165 | Steel | blank | 10 | 14 | 90 x 30 | |
| 2142.3166 | Steel | blank | 10 | 10 | 90 x 30 | |
| 2142.3167 | Steel | blank | 8 | 14 | 90 x 30 |